To bind edges, cut a 2" (50 mm), wide bias strip of fabric.
Straight stitch, length 2.5, or zigzag or dec-orative stitch at desired length. 1. Snap on Bias Binder.
2. Cut the end of the Bias Tape to a point. Insert the Bias Tape from the outside of the funnel guide, into the slot and pull it down under the foot.
3. Place the edge to be bound into the groove on the left side of the funnel guide.
4. Adjust needle position as needed or to adjust the position of the binder funnel/guide, loosen the screw on the top of the foot and position the funnel guide as needed. |
Home Page
Sewing Machine Accessories
Details
Read on
