To bind edges with 1/4" (6 mm) Bias Binding, cut a 24 mm (1") wide bias strip of fabric, or use packaged narrow double fold Bias Binding.
Straight stitch, length 2.5, or zigzag or dec-orative stitch at desired length.

  1. Snap on Bias Binder.
2. Cut the end of the bias tape to a point. Insert the bias tape from the outside of the funnel guide, into the slot that matches its width, (the second slot is perfect for packaged bindings), and pull it down under the foot.
3. Place the edge to be bound into the groove on the left side of the funnel guide.
4. Adjust needle position as needed or to adjust the position of the binder

funnel/guide, loosen the screw on the top of the foot and position the funnel guide as needed.